I need a larger peltier device. I was going to order a 320w peltier for some extreme testing madness, but I've got to wait a couple months.
The 40w peltier that I had ran the Pentium and K6-2 at default speeds at around 80F. The first board I setup to run with a peltier maxed at 300-some odd MHz, so I had to get a newer mobo. Unfortunately, it maxes at 550MHz (default speed of the K6-2). I'll try it again with the Pentium 1 CPU in a couple months when I get that 320w unit. I'm betting it'll hit about 400 and maybe higher if the temps are low enough.